Model: HX-600
Operating voltage: 220 (V) Crimping output: 1500 (kgs) Dimensions: L1.85M * W0.76M * H1.83M (mm)
Weight: about 527 (kg) Specifications: L1.85M * W0.76M * H1.83M :: 3300W rated power
Working pressure :: 0.4MPA-0.6MPA Air source filtered and dried

1.1 Features

Automatic cable terminal crimping machine is a set of feeding, cutting, stripping, pressing end as one of the automatic multi-functional machine. Traditional cable crimp terminal is manual, not only inefficient, and unstable product quality, and operations staff to continuously repeat the same action highly concentrated eyesight, eye fatigue. The companies in the wire terminal industry for many years, has accumulated a wealth of technology and experience, after two years of painstaking research and development, the introduction of automatic cable terminal crimping machine, designed to provide the best solutions for the wire processing industry. It has the following features:

1. a wide range: mainly used pressing: PH, XH, EH, ZH et rehearsals communication harness terminals, SCN, SM, VH, DuPont strip for a connector cable terminal.

2. Cost savings: the front feed line, after handing out the finished product, all the processes are completed automatically, saving customers a lot of production costs.

3. Stability: the eccentric shaft and the cam structure to fight side terminal pressing force balance, so that the wiring harness crimping neat, consistency, product quality is very stable. The machine is stable, high yield.

4. High precision: a stepping motor control cutting, sub-line strip length, an accuracy of 0.1 mm.

5. positional accuracy: the use of servo motor drive control cable walk, crimping precise control to ensure that the wiring harness, cable conduction properties.

6. The fight ends diverse ways: using the steering mechanism. Switchable cable crimping direction at both ends

7. Automatic: fully automated production, saving labor costs: from cutting into the cable length, stripping sub-lines, pressure double (single) head terminal process is completed automatically without staff involvement.

8. footprint: Each device occupies less than 2.5 square meters, saving factory rent.

9. High efficiency: Crimping 18000 PCS / H (MAX), the machine can work 24 hours.

10. Adjust simple: ordinary people with minimal training, a person can operate several machines.

11. Operating fool: Touch screen operation, parameter setting and operation of the whole fool, a look that will be.
1.1. Basic parameters
Model Name: ACP-Z
Package dimensions: length 1.45m × width 0.850m × height 1.75m
Dimensions: Length Width 0.76m * 1.85m * 1.83m high
Weight Approx: 527KG
Working pressure: 0.4MPa-0.6MPa, air filtration and drying requirements
Operating voltage: 220V 50Hz
Current Rating: 15A
Power: 3300W
Placed space: 2M × 2.5M