Bulk automatic terminal machines

1. In addition to having all the characteristics of HX-01 outside. Bulk terminal enables automatic feeding:
2, automatic operation uniform, strong stability;
3, lower cost, compared with the same products can be reduced by 30% to

Model: HX-03
Wire size: 0.03 ~ 2.0mm2 (equivalent to UL1571 # 32 ~ # 14.), The largest diameter wire cortex φ4.0 or less
Capacity: Single-ended pressing: 6000 / hour (equivalent UL1571 # 32 ~ # 14, when the cut length 30mm)

Single-ended pressing twisting single-ended line: 5300 / hour
Features: wire sizing cut ends stripping, stripping both ends half, single-ended pressing, twisting single-ended line, automatic setting
Mouth depth, automatically set crimping position
Wire feed speed: 2500mmc (MAX)

Discharge mode: Servo rotary discharge
Cutting length: 30 ~ 9999mm * Minimum cut length, pressed against the mold used is different.
Cutting accuracy: When the cut length is less than 100mm, deviation 0.5mm + (setting length × 0.002)

When cutting length of 100mm or more, the deviation 1.0mm + (setting length × 0.002)
Stripping Length: Front: 1.00 ~ 15.00mm (half Stripping length: 2.00 ~ 12.0mm)
                 Backend: 1.00 ~ 8.00mm (half Stripping length: 2.00 ~ 6.0mm)

Twisted length: twisting single-ended line: Stripping length 3mm or more
Applicable mold: LEF terminal card mode, direct-mode terminal card
Crimping machines: 1.5 / 2.0 / 2.5TON universal mute terminal machine 1
Control: 7 inches color touch screen, intelligent PLC control
Detection means: whether wire detection, detection of wire tie, Crimping bad testing, air pressure detection
Power: Single-phase: AC210 ~ 230V 50 / 60HZ 10A
Compressed air: 0.5 MPa to about 140NL / min
Working temperature: 5 ~ 35 ℃ (ambient temperature)
Humidity: 30 ~ 80% RH (non-condensing)
Warranty: 1 year after delivery (excluding consumable parts)
Mechanical Dimensions: 800 W × 600D × 1450 H (mm) (excluding projections)
Quality: about 300kg
Optional Accessories: Terminal vibration plate